KCHD-502H Multiple Sample Changer w/Heat Option
KCHD-502H Multiple Sample Changer with heater option
19,000.00 19000.0 USD
KDCU-551H Auto Cleaning and Sampling Unit
KDCU-551H Auto Cleaning and Sampling Unit
16,271.00 16271.0 USD
For Metal cleaning acid & ferrous concentrations
15,625.00 15625.0 USD
KCHD-502N Multiple Sample Changer
KCHD-502N Multiple Sample Changer

• Adoption of a peristaltic pump allows an operator to measure the density on higher viscous sample of 30,000 mPa•s
• The sequential program automatically stops when the unit detects an empty vial position after the last sample vial is finished.
• This unit is equipped with self-diagnostic function by checking sequence program, keypad function, and display.
• The auto-power-off functions when a series of measurements is finished so that it saves electricity when operated overnight unattended. This feature can be set in while the unit is being activated.
• The cleaning efficiency is increased by blending air into rinse solvent. By this way, the total amount of rinse solvent is decreased and saved. In addition, not only inside but outside of the nozzle can be cleaned very well since the rinse solution is fed from the outside of the nozzle unit.
• Expensive sample materials like perfume or fragrance can be returned back to sample vial after measurement are over.
• The CHD-502 series provides a variety of models with different specifications depending on what type of sample material is going to be measured : N type for room temperature used, SS type for small size sampling, H type for high temperature or C type for low temperature used.

Type name: Standard type N
Number of vials: Up to 30 (20mL vial)
Min. sample required: 10mL
Sample position: Turntable System
Sampling method: Pressurizing by peristaltic pump
Drain system: 1) Pressurized draining 2) Sample-returning to vial system
Program sequence: 1) Sample measurement only 2) Sample measurement after the "Air & Water" calibration 3) Sample measurement after the "Two kinds of Standard liquids" calibration
Control: 1) Auto-start by [Meas.] key of density / specific gravity meter or concentration meter 2) Auto-start by [Start.] key of CHD-502 unit 3) Rinsing and purging 4) Auto-calibration by [Calib.] key of density / specific gravity meter or concentration meter 5) Priority measurement
Display: 20 digits by 2 lines LCD with a backlight
Ext. communications: 1) Simplified serial interface via the connecting cable (980303388) 2) RS-232C interface for communications
Ambient condition: 1) Temperature: 5 ~ 35°C ; 2) Humidity: less than 85%RH (No condensation)
Dimension: 582(W) x 445(D) x 392(H) mm
Weight: Approx. 17kg
14,200.00 14200.0 USD
Density/Specific Gravity Meter
ASTM D1250,D1475,D4052,D4806,D5002,D5798,D5931

Quickest measurement in 20 seconds Minimum sample of 1.0 mL
Viscosity correction for high-viscosity samples*1 Touchscreen operation
Comes with Density Standard Liquid Equipped with sampling*2 & dry pump Completely ready for use Customizable display & sound
Easy operation & maintenance-free

-Measurement Range; 0 ~ 3 g/cm3
-Temperature Range; 0 ~ 96°C (32 ~ 204.8°F)
-Accuracy; Density ±1x10-4 g/cm3 (0.0001 g/cm3)/ temperature ±0.05 °C (±0.09 °F)
-Repeatability; SD 5x10-5 g/cm3
-Min sample required; Approx. 1 mL (Syringe) / Approx. 2mL (Pump)
-Measurement time; to 4 mins (Manual) / 2 to 10 mins (Auto)
-Resolution; Density & SG 0.0001/ temperature 0.01
-Viscosity Correction: YES
-Method; Saves up to 100 different methods in built-in memory
-Data I/O; USB flash drive as data storage medium, app notes provided in USB flash drive
-Dimensions; 320 (W) x 365 (D) x 250 (H) mm (12.6 (W) x 14.4 (D) x 9.8 (H) inches)
-Weight; 18 kg (39.7 lbs)
13,900.00 13900.0 USD
KDCU-551N Auto Cleaning and Sampling Unit
KDCU-551N Auto Cleaning and Sampling Unit
10,847.00 10847.0 USD
Auto Sampling Unit
KDCU-600 Auto Sampling Unit
8,305.00 8305.0 USD
DA-100 Density/Specific Gravity Meter
KEM MODEL: DA-100 density/specific gravity meter
The built-in thermostatic control makes measurement stable in resulting values.
Thus, human error is eliminated in addition to easy operation and high precision.

>Measurement in a short period of time
>With built-in thermal control
>High precision thermal sensor is installed in measuring cell
>Concentration can be obtained by conversion.

Range: 0 - 3 g/cm3
Accuracy: ±0.001 g/cm3
Temperature: 15 - 40°C, 59 -°F
Display: 16 X 2 LCD with back light
Contents of display: Density, relative gravity, measurement temperature
Interface: RS232C single channel
7,900.00 7900.0 USD
Exchange Burette (20mL) for AT700
K120371802: K120371802; Exchange Burette (20mL) for AT700
3,374.00 3374.0 USD
Sampling Unit for DCM-101 Density Meter
ASU-100D Sampling Unit for DCM-101
2,921.00 2921.0 USD
DA-130N Portable Density/Specific Gravity Meter
KEM MODEL: DA-130N Portable Density/Specific Gravity Meter
MODEL: DA-130N Portable Density/Specific Gravity Meter
MEASURING METHOD: Resonant frequency oscillation
WHAT TO MEASURE: Liquid samples
MEASURING RANGE: 0.0000 to 2.0000g/cm3
ACCURACY: ±0.001g/cm3
RESOLUTION: 0.0001g/cm3
TEMPERATURE RANGE: 0 to 40.0° C (32 to 104° F)
BACKLIT DISPLAY: Density, temp-compensated density, SG, temp-compensated
SG, Brix%, Alcohol wt%, Alcohol vol%, %H2SO4, API degree,
Baume degree, Plato degree, Proof degree, Temperature in
° C/° F, Sample No., Stability, Data storage, Data output, Data
deletion, Battery level, etc.
TEMPERATURE COMPENSATION: Up to 10 coefficients for temperature compensation can be entered.
MATERIALS IN CONTACT WITH SAMPLE: PTEE, borosilicate glass, polypropylene (PP), Fluoro Rubber *May not be resistant to every sample and cleaning solution.
AUTO-CALIBRATION: Density of water at each temperature, required for calibration of measuring cell, is pre-installed.
SAMPLING BY: Syringe-type hand pump
DATA STORAGE: Up to 1,100 samples
EXTERNAL OUTPUT: Infrared communications port (conforming to IrDA Ver. 1.2) Conversion to RS-232C output (Optional parts required)
POWER SUPPLY: Alkaline battery LR03 (AAA) 1.5V 2pcs
BATTERY LIFE: Approx. 90 hours
WEIGHT: Approx. 360g (0.794 lbs)
2,800.00 2800.0 USD
Pump A (2 ways)
2,400.00 2400.0 USD
Sampling Unit (Peristaltic Pump Suction Type)
K12-01824:K12-01824; Sampling Unit (Peristaltic Pump Suction Type)
2,279.00 2279.0 USD
Thermal Printer
K12-02-618-0348; KDP-600:K12-02-618-0348; KDP-600; Thermal Printer
1,542.00 1542.0 USD
LCD Unit for DA6XX
K12-01822:K12-01822; LCD Unit for DA6XX
1,200.00 1200.0 USD
Connection Kit required for (DA-XX)
k12-02764-01-48:Connection Kit required for DA-XX Density meter to connect with Auto Cleaning and Sampling Unit; DCU-551H
1,157.00 1157.0 USD
Connection Kit required for (DA-XX)
K12-02763-01-48:Connection Kit required for DA-XX Density meter to connect with Auto Cleaning and Sampling Unit; DCU-551N
1,138.00 1138.0 USD
Thermal Printer DP-600 w/cable
K120261803: Thermal Printer DP-600 with cable.
1,100.00 1100.0 USD
Cell Unit for DA-130N Portable Density Meter
K12-01131:K12-01131; Cell Unit for DA130N Portable Density Meter
1,100.00 1100.0 USD
Connection Kit for CHD-502N
k12-02763-00-48:Connection Kit required for DA-XX Density meter to connect with Multiple Sample Changer CHD-502N
945.00 945.0 USD