Sale
Evaporator for Ores
ADP-512 High Heat Evaporator for Ores for Karl Fischer

[Features]
1) Measurement for micro amount of water is least affected from ambient moisture because the movement of
sample boat is controlled by magnet, operated outside the sealed heating unit, and thus accurate and reliable
results are assured.
2) The newly designed electric furnace operates in a wide range of degrees from room temperature up to 1000°C,
featuring relatively short warm-up time, taking approximately 30 minutes for temperature rise as well as for
equilibrium respectively.
3) PID control by the built-in thermostat provides an accurate and stable oven temperature.
4) The safety while working on the electric oven is secured because the maximum temperature over the oven
surface is always kept under 70°C.
5) The built-in excessive heat prevention unit is another safety measures with a thermometer in it, which is
separate from the sensor for temperature control.
6) This evaporator is equipped with two types of electric furnace (for low temperature and for high temperature),
which enables measurement for hygroscopic water as well as combined water without taking the sample out
of the oven.
24,000.00 24000.0 USD
Sale
Evaporator (KF-610 series)
ADP-611 Evaporator

The ADP-611 is an evaporator/oven to be used and connected with a KF moisture titrator for moisture testing of solid samples, powder samples or samples that may interfere by side reaction if titrated by direct injection method.

SPECIFICATIONS:
-Type and model; Model ADP-611 Evaporator
-Heating method; Electrically conductive clear heater glass
-Temperature range; Control method: proportional
Setting range: 50 ~ 300°C Minimum temperature setting: 1°C
Temperature precision: ± 2°C
Temperature sensor: K-thermocouple
-Temperature display: LED digital 3 characters
-Heater unit : Pyrex glass tube φ 30 × 335mm
-Sample boat: Pyrex glass 68 L × 25 W × 15 H mm , Capacity 16mL
-Carrier gas: Nitrogen: not included in supplied parts./ Nitrogen gas, regulator, and tubing have to be prepared by user
-Gas dryer: Zeolite 100g 2 pcs
-Gas flow: 100 ~ 300 mL/min
-Dimension: 370 (W) × 195 (D) × 217 (H) mm
-Power: AC100 ~ 120V± 10% 50Hz/60Hz / AC220 ~ 240V± 10% 50Hz/60Hz (Pre-adjusted before shipment from the factory)
-Power Consumption: Approx. 300W
Weight: Approx. 5kg
11,299.00 11299.0 USD
Sale
Evaporator (for Karl Fischer testing heavy Oil)
ADP-513 Karl Fischer Oil Evaporator

FEATURES:
-Digital temperature control
-Rotameter carrier gas flow control
-Built-in carrier gas drying system Operating temperature ambient up to 200°C Heated transfer tube
-Overheating protection
-Automatic cell evacuation system

SPECIFICATIONS:
Temperature Range: Room - 200°C
Heating method: Cartridge base heater
Ambient conditions: 5 - 35°C, less than 85% RH
Power: AC 200-240, 50/60Hz
Power Consumption: 400W
Dimensions: 320 x 210 x 330 mm
Weight: Approx. 6 kg
8,850.00 8850.0 USD
Sale
Touch Panel Controller
MCU-610 Touch Panel Controller for Titrator
7,457.00 7457.0 USD
Sale
KEM Amenity Meter
AM-101
4,312.00 4312.0 USD
Sale
Liquefied gas sampler/MKC
K433-3389: Liquefied gas sampler/MKC
3,345.52 3345.52 USD
Sale
1Component Type Titration Cell Unit with Funnel
1Component Type Titration Cell Unit with Funnel
3,297.72 3297.7200000000003 USD
Sale
2Component Type Titration Cell Unit
K120735501(12-006-6100-48) (K433-0005): Karl Fisher Cell Unit; For two solution system; Includes Titration cell, Inner buret (2-solution), Twin Platinum detector electrode and other attachment
3,248.00 3248.0 USD
Sale
1Component Type Titration cell unit
Titration cell unit complete with 1component inner burette, detector electrode, port plus, and stir bar
3,245.00 3245.0 USD
Sale
Liquefied gas sampler/MKA
K433-3014: Liquefied gas sampler/MKA
3,106.55 3106.55 USD
Sale
Heat Extractor for Sugar Samples
ADP-344; Heat Extractor for Sugar Samples
2,985.00 2985.0 USD
Sale
Homogenizer attachment
K433-0085: Homogenizer attachment
2,927.33 2927.33 USD
Sale
Single Glassware, Complete Set and Accessories
Single Glassware Setup, Complete Set And Accessories includes: 26100SIV: Aquapal Molecular Sieve (bottle) 26100VES: Titration Vessel with caps and seals 26100DEL: Detector Electrode 26100GEL: Generator Electrode (without Frit) 26100ODT: Drying Tube with cap 26100BAR: Stirrer Bar 26100NEE: Needle / 4 in 26102SYP: 5 each disposable syringes 26100SEP: Pack of 50each Injection Septas 26100FUN: Funnel
2,820.00 2820.0 USD
Sale
Standard Glassware, Complete Set and Accessories
Standard Glassware, Complete Set And Accessories includes: 26100SIV: Aquapal Molecular Sieve (bottle) 26100VES: Titration Vessel with caps and seals 26100DEL: Detector Electrode 26100GEF: Generator Electrode (with Frit) 26100ODT: Drying Tube with cap 26100BAR: Stirrer Bar 26100NEE: Needle / 4 in 26102SYP: 5 each disposable syringes 26100SEP: Pack of 50each Injection Septas 26100FUN: Funnel
2,820.00 2820.0 USD
Sale
Primary Burette Drive (Fixed) for AT/MKV-710 series
Primary Burette Drive for AT/MKV-710 series. Drive Only. (EBU-710-XXB Burette Unit (XXmL) not included.
2,650.00 2650.0 USD
Sale
Heater tube
K433-0087: Heater tube
2,400.00 2400.0 USD
Sale
A&D-HR-200-C Analytical Balance
A&D HR-200-C Analytical Balance The HR-200-C offers ten units of measure including grams, carats, troy ounces, pennyweight and momme; and provides capacity of up to 210 grams (1050 ct). Features: -Large weighing chamber holds up to a 250mm volumetric flask wide angle LCD Display -Good Laboratory Practices (GLP) software -Multi-functional weighing: %,counting,grams,mg. oz ozt,dwt,ct,mom,GN,t,TL -Clearly marked operating keys, full range tare -Range Key: suppresses least significant digit for faster speed & better stability when required -Counting function -Push button calibration -Front key selectable weighing filters -Outputs serial number of the balance -System diagnosis: IDs overload, weighing pan error, power failure, digital tare error, calibration errors & low battery -Body & frame constructed of exta strong die-cast aluminum alloy -RS-232C standard -Optional Battery pack -Last digit suppression -One touch printing -GLP/LIMS/ISO compliant Specifications: -CAPACITY: 210g -READABILITY: 0.1mg -PAN SIZE: 85mm /3.3" dia. -PERCENTAGE MIN DIV: 0.01%, 0.1% or 1% (auto prompt) -COUNTING MIN WEIGHT: 0.1mg -STABILIZATION TIME: 3 seconds -SENSITIVITY DRIFT:+-2ppm/degreeC -DISPLAY REFRESH: 5 times per second/10 times per second -DIMINENSIONS: 8.4x12.6x11.9" -WEIGHT: 12.5lbs
2,400.00 2400.0 USD
Sale
Hood
K770-048: Hood
2,389.65 2389.65 USD
Sale
Titration unit / homogenizer
K433-0086: Titration unit / homogenizer
2,389.65 2389.65 USD
Sale
Oven
K433-0104: Oven
2,270.17 2270.17 USD