Sale
Sampling nozzle for DA-130N (L=300)
K12-00498-01; Sampling nozzle
20.00 20.0 USD
Sale
Built-in Bellows for DA-130N (2pcs/set)
K12-01566-10; Built-in Bellows
71.00 71.0 USD
Sale
Grommet for DA130N
K20-08341; Gromet
9.06 9.06 USD
Sale
Rubber Bulb Kit for DA-130N
K12-04428; Rubber bulb kit with optional manual pump used to dry the cell (squeeze to pump in air).
80.00 80.0 USD
Sale
Auto Sampling Unit
KDCU-600 Auto Sampling Unit
8,305.00 8305.0 USD
Sale
KDCU-551N Auto Cleaning and Sampling Unit
KDCU-551N Auto Cleaning and Sampling Unit
10,847.00 10847.0 USD
Sale
KDCU-551H Auto Cleaning and Sampling Unit
KDCU-551H Auto Cleaning and Sampling Unit
16,271.00 16271.0 USD
Sale
For Metal cleaning acid & ferrous concentrations
DCM-101
15,625.00 15625.0 USD
Sale
KCHD-502N Multiple Sample Changer
KCHD-502N Multiple Sample Changer

Features
• Adoption of a peristaltic pump allows an operator to measure the density on higher viscous sample of 30,000 mPa•s
• The sequential program automatically stops when the unit detects an empty vial position after the last sample vial is finished.
• This unit is equipped with self-diagnostic function by checking sequence program, keypad function, and display.
• The auto-power-off functions when a series of measurements is finished so that it saves electricity when operated overnight unattended. This feature can be set in while the unit is being activated.
• The cleaning efficiency is increased by blending air into rinse solvent. By this way, the total amount of rinse solvent is decreased and saved. In addition, not only inside but outside of the nozzle can be cleaned very well since the rinse solution is fed from the outside of the nozzle unit.
• Expensive sample materials like perfume or fragrance can be returned back to sample vial after measurement are over.
• The CHD-502 series provides a variety of models with different specifications depending on what type of sample material is going to be measured : N type for room temperature used, SS type for small size sampling, H type for high temperature or C type for low temperature used.

Type name: Standard type N
Number of vials: Up to 30 (20mL vial)
Min. sample required: 10mL
Sample position: Turntable System
Sampling method: Pressurizing by peristaltic pump
Drain system: 1) Pressurized draining 2) Sample-returning to vial system
Program sequence: 1) Sample measurement only 2) Sample measurement after the "Air & Water" calibration 3) Sample measurement after the "Two kinds of Standard liquids" calibration
Control: 1) Auto-start by [Meas.] key of density / specific gravity meter or concentration meter 2) Auto-start by [Start.] key of CHD-502 unit 3) Rinsing and purging 4) Auto-calibration by [Calib.] key of density / specific gravity meter or concentration meter 5) Priority measurement
Display: 20 digits by 2 lines LCD with a backlight
Ext. communications: 1) Simplified serial interface via the connecting cable (980303388) 2) RS-232C interface for communications
Ambient condition: 1) Temperature: 5 ~ 35°C ; 2) Humidity: less than 85%RH (No condensation)
Dimension: 582(W) x 445(D) x 392(H) mm
Weight: Approx. 17kg
14,200.00 14200.0 USD
Sale
KCHD-502H Multiple Sample Changer w/Heat Option
KCHD-502H Multiple Sample Changer with heater option
19,000.00 19000.0 USD
Sale
Sampling Unit for DCM-101 Density Meter
ASU-100D Sampling Unit for DCM-101
2,921.00 2921.0 USD
Sale
IR-RS Converter
K69-00733: K69-00733; IR-RS Converter
268.00 268.0 USD
Sale
Flow rate indicator
K583-0012: Flow rate indicator
250.91 250.91 USD
Sale
Needle valve
K582-0013: Needle valve
215.07 215.07 USD
Sale
Speed controller
K582-0009: Speed controller
39.42 39.42 USD
Sale
Tube joint
K581-3449: Tube joint
17.92 17.92 USD
Sale
Tube joint
K581-3447: Tube joint
17.92 17.92 USD
Sale
Joint
K581-0089: Joint
8.36 8.36 USD
Sale
Joint
K581-0088: Joint
7.17 7.17 USD
Sale
Joint
K581-0068: Joint
66.91 66.91 USD