KCHG-310-12: KEM Sample Changer, 12 Samples

CHA-700-11 : Automatic Titrator Multiple Sample Changer (11 sample)

PCD-500

CHA-700 : Automatic Titrator Multiple Sample Changer

KEM AT­-710B Automatic Potentiometric Titrator with Standard Preamp.

Specifications
­Type: Automatic Potentiometric Titrator

­Model: AT­710B

­Product configuration: AT­710 w/standard preamp, w/Magnetic stirrer
(combined pH electrode and temperature compensation electrode included)

­Detection range:
1) Potentiometric : ­2000mV to +2000mV
2) pH : ­20.000 to 20.00pH
3) Temperature : 0 to 100°C

­Titration mode: Auto Titration, Auto Intermit, Intermit, Stat
­Method: Standard method 20. (Max 2 methods can be linked)

­Kinds of titration: Potentiometric (acid/base, redox, precipitation), Photometric,
Polarization, Conductivity

­Titration form: Full titration (Auto EP detection), EP Stop, Level Stop

­Special application: Measurement of electrode potential (pH, potential), Acid
dissociation constant (pKa)

­Key operation: Sheet Key on the main unit

­Displays:
1) White LED­backlit LCD
2) English / Japanese / Mandarin Chinese /Korean / Russian / Spanish
3) 1­channel display

­Calculation: Concentration of content, statistics data processing (mean, SD
and RSD) and automatic averaging of blank and factor value

­Data Storage: 50 samples

­GLP conformance: Registration of operator / Record of check results / Record
of electrode calibration / Verification of burette capacity / Management of
conduction time

­Burette size: 20mL glass burette with brown cover (Standard) Optional burette
units: 10mL, 5mL, or 1mL

­Burette accuracy:
50mL burette(Auto dispenser) ± 0.5mL,
20mL burette ± 0.02mL reproducibility ± 0.01mL
10mL burette ± 0.015mL reproducibility ± 0.005mL
5mL burette ± 0.01mL reproducibility ± 0.003mL
1mL burette ± 0.005mL ; reproducibility ± 0.001mL

­External I/O:
RS­232 port x 2: for Dot matrix printer, Electronic balance, Data Capture
Software (SOFT­CAP)
SS­BUS × 1: for Multiple sample changer, APB
ELE. × 1: for Smart electrode
TEMP.COMP. × 1: an Input terminal for the temperature sensor to correct reagent
volume, sensor Pt100, temperature reading accuracy: ±0.5°C (burette 1 only)
USB × 1: for USB flash drive, Thermal printer, Keyboard, Barcode reader, Foot
switch, USB HUB, Android device

­Extensibility:
Automatic piston burette: Can control max 10 burette drives (Including two
built­in burette drives)
Multiple sample changer: CHA­700 series

­Ambient condition:

1) Temperature: 5 to 35°C
2) Humidity: 85%RH or below (no condensation)

­Power source: AC100 ­ 240V ±10% 50/60 Hz
­Power consumption: 20W

­Dimensions:
Titration unit: 141(W) × 296(D) × 367(H)mm
Printer: 106(W) × 180(D) × 88(H) mm

­Weight:
Titration unit: Approx. 4.0kg
Printer : Approx. 0.4kg

­Conformity standard: CE marking EMC: EN61326­1 LVD: EN61010­1 RE
Directive Burette unit EBU FCC Part15 SubpartC FCC ID : 2ABSVEBU01

APB-620; Automatic Piston Burette for Auto Titrator

KCM-117S: Specific Conductivity Meter (for ultra-purified water)

APB-610; Automatic Piston Burette for Auto Titrator

KPTA-610: Photometric Preamp. Adaptor

KPTA-510: Photometric Preamp. Adaptor

APB-600-KF

APB-600-AT

K12-00110-00:Photometric Sensor

KCM-117: Specific Conductivity Meter

K12-02854 (old part no. K020-0006:2-system Pump A (for shower & rinse). Stronger shower rinse for non-aqueous samples.

KCMT-610: Conductivity Preamp

KCMT-510: Conductivity Preamp

K1207356 (K12-006-6300-48); Titration Cell Unit, 2 solution with drain valve. The Cell Unit includes all of the necessary "glassware" items including: -Titration Cell with drain valve; -Inner buret (2 solution); K433-0006 -Detector electrode; K103-M713 -Port plug 19/25; K550-0073 -Desiccant tube; K433-3116 -Stirrer bar; K500-3362S

K020-0007:2-system Pump B (for separate drain)

K120564020: K120564020; Additional 2nd burette (Built-in) 20mL for AT-710 series